INSIDE MOUNT

WIDTH: Measure from left to right in 3 positions (top, middle, bottom). Take the smallest measurement.

HEIGHT: Measure from top to bottom in 3 positions (left, center, right). Take the largest measurement.

Do not make any deductions when you are measuring. The manufacturer will be sure to make the deductions by removing 1/8” off the fabric on each side to ensure a perfect fit.

OUTSIDE MOUNT

WIDTH: Give the measurements of the space you want to cover from left to right.

HEIGHT: Give the measurements of the space you want to cover from top to bottom.

The width and height measurement should always include the cassette, valence, headrail or roller. The fabric will be approximately 5/8” less on each side. If, for example, the space to be covered is 60”, it is recommended to order 64” (being an additional 2” on each side) to ensure that the entire frame is covered, avoiding any gaps that would allow the light to shine through.

Notes:

1. Ensure you have enough depth to install your chosen product.
2. Take note of any door knobs, locks, handles or cranks that might be in the way of your blind.

Notes:

1. For ceiling mounted blinds you need a minimum of 1 3/4" clearance to install the brackets.